![]() |
Здравствуйте, гость ( Вход | Регистрация )
![]() |
![]()
Сообщение
#1
|
|
Группа: Сообщений: 0 Регистрация: -- Пользователь №: 0 Предупреждения: (0%) ![]() ![]() |
When i run the the setup_addon.exe, tick the "I Agree" box, insert the path to my PotC directory and then press Start Install, it says: "Cannot move file: Cannot read the source file or the disk". Then it popus a new windows that says: "Cancelled"
It dids it three times and then the setup_addon.exe is not responding. I have unticked both Read-Only from the properties of the addon installation folder and the PotC directory. What should i do? |
![]() ![]() |
bullet |
![]()
Сообщение
#2
|
Старый пират ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Группа: бета-тестер Сообщений: 2,088 Регистрация: 11-April 05 Из: Петроград Пользователь №: 656 ![]() |
2Dway
Have you looked through |
![]()
Сообщение
#3
|
|
Группа: Сообщений: 0 Регистрация: -- Пользователь №: 0 Предупреждения: (0%) ![]() ![]() |
Hello First i want to say thank you for everyone that has and is still putting work into this modification. I cant wait to get into the world.
I am having the same issue like the first poster. |
Strelok |
![]()
Сообщение
#4
|
капер ![]() ![]() ![]() ![]() ![]() ![]() Группа: Seaward.Ru Team Сообщений: 544 Регистрация: 18-June 05 Из: Москва Пользователь №: 849 ![]() |
Hello First i want to say thank you for everyone that has and is still putting work into this modification. I cant wait to get into the world. I am having the same issue like the first poster. Go to section ENGLISH VERSION, post number 8 by AlexusB. Perhaps, it will make you life easier. This section is for questions about the problems with installation. |
![]()
Сообщение
#5
|
|
Группа: Сообщений: 0 Регистрация: -- Пользователь №: 0 Предупреждения: (0%) ![]() ![]() |
This post is in the English Version section. That 8th post you told me to check out had nothing about install. Was mainly about cannon ranges/reload. I just got it to work by manually extracting each one. Is there a certain place that the npc_ config settings supposed to go and the settup_addon_base stuff. I ran the game withought those in the directory and one of the starting characters has no Picture.
|
Strelok |
![]()
Сообщение
#6
|
капер ![]() ![]() ![]() ![]() ![]() ![]() Группа: Seaward.Ru Team Сообщений: 544 Регистрация: 18-June 05 Из: Москва Пользователь №: 849 ![]() |
This post is in the English Version section. That 8th post you told me to check out had nothing about install. Was mainly about cannon ranges/reload. I just got it to work by manually extracting each one. Is there a certain place that the npc_ config settings supposed to go and the settup_addon_base stuff. I ran the game withought those in the directory and one of the starting characters has no Picture. Try this address for the basic version of the SLiB New english interface and something else is in the post 15 by Alexus. Again the name of the section is ENglish Version. ![]() |
Guest |
![]()
Сообщение
#7
|
Гость ![]() |
while install slib on to my computer I get Cabneit file does not have the correct format [0X0002]
what is this mean Please help me |
TAHAT |
![]()
Сообщение
#8
|
Подвергающий ласкам ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Группа: модераторы Сообщений: 4,548 Регистрация: 22-March 05 Из: Бердск, НСО Пользователь №: 594 ![]() |
The error message means *.slb-files are corrupted (some errors occured during download process)... Please, download corrupted files again... Use a download-manager to avoid file corruption...
|
Oldtimer |
![]()
Сообщение
#9
|
Гость ![]() |
Hi all,
I have just installed tha Alexus addon(succesfully unpacked it claims) but when I want to start game I get the following message: - cannot start this program as STORMEXT.dll could not be found. The problem may possibly be solved by reinstall. What I have in the POTC folder is a stormex2.dll no 1.9.4.46. Is there a solution for this? The base game is english, bought in Sweden. Notebook, Intel Mobile Pentium 750, Mobility Radeon 600, XP Pro. Enough memory. BTW I extracted the russian fonts into POTC main folder. If someone is able to help please try to explain simply and step by step as I am a complete computer dummy. Regards, Oldtimer |
navy |
![]()
Сообщение
#10
|
Hagane no Renkinjutsushi ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Группа: Seaward.Ru Team Сообщений: 5,972 Регистрация: 15-March 05 Из: Волгоград Пользователь №: 578 ![]() |
Ok... First, you need to install clear PotC (it is a good idea to install it with short path i.e. "C:\Games\PotC" without spaces) game and download these files
| data1.slb 1.6 Мб | data2.slb 66.5 Мб | data3.slb 2.0 Мб | setup.rar 0.45 Мб | Place them in some folder and unpack setup.rar in it. Then run setup_addon.exe file, select I Agree, chose "path to game" and press "install game" You need to wait some time, depends your computer.... When it says "All fine" just start game whits Engine.exe or shortcut of original game |
Гость |
![]()
Сообщение
#11
|
Гость ![]() |
Hi Navy,
and thx for your help. Unfortunately, with autoinstall I can only install the game to a Bethesda main folder and POTC is a subfolder there, with full spelling. Anyway it won`t work. I`ll try a reinstall, but I suspect that the path to stormex gets broken in my specific hardware/software setup. But I do not know how to check it and more importantly, how to fix it. Regards, Oldtimer |
navy |
![]()
Сообщение
#12
|
Hagane no Renkinjutsushi ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Группа: Seaward.Ru Team Сообщений: 5,972 Регистрация: 15-March 05 Из: Волгоград Пользователь №: 578 ![]() |
Цитата Unfortunately, with autoinstall I can only install the game to a Bethesda main folder and POTC After installing, you can simply move game in any folder you like. That is not important for the addon, except said above. It realy strange that missing stormext.dll. We'll check installation files |
Strelok |
![]()
Сообщение
#13
|
капер ![]() ![]() ![]() ![]() ![]() ![]() Группа: Seaward.Ru Team Сообщений: 544 Регистрация: 18-June 05 Из: Москва Пользователь №: 849 ![]() |
[quote name='Oldtimer' date='Mar 13 2006, 16:19' post='101507']
Hi all, I have just installed tha Alexus addon(succesfully unpacked it claims) but when I want to start game I get the following message: - cannot start this program as STORMEXT.dll could not be found. The problem may possibly be solved by reinstall. For better instruction in respect of the game installation and beginning try to read FAQ in the SLiB site in English. If yopu follw all instructions precisely then it shall be fine and you can proceed furtehr with the game. Just remember one thing: first you install the base (the upper set of the files) and after that upgrade (beneath them). After that you may install files for towns and a boat. It is all pretty well described in the FAQ. After accepting the AlexusB's statement with a dot do not forget to show the path to the game for example C:\POTC\etc. It must work fine. |
Гость |
![]()
Сообщение
#14
|
Гость ![]() |
Hi Strelok,
thanks, I didn`t realize that you had to install both sets of files. Game seems to work now. It`s really challenging, even on "bosman" level. Regards, Oldtimer |
Strelok |
![]()
Сообщение
#15
|
капер ![]() ![]() ![]() ![]() ![]() ![]() Группа: Seaward.Ru Team Сообщений: 544 Регистрация: 18-June 05 Из: Москва Пользователь №: 849 ![]() |
Hi Strelok, thanks, I didn`t realize that you had to install both sets of files. Game seems to work now. It`s really challenging, even on "bosman" level. Regards, Oldtimer ![]() ![]() ![]() |
Гость |
![]()
Сообщение
#16
|
Гость ![]() |
![]() ![]() ![]() Hi again Strelok, I did read it carefully. But the language used made me believe that the lower set of files should be used separately to upgrade an older independent version of the addon. Regards, Oldtimer |
Strelok |
![]()
Сообщение
#17
|
капер ![]() ![]() ![]() ![]() ![]() ![]() Группа: Seaward.Ru Team Сообщений: 544 Регистрация: 18-June 05 Из: Москва Пользователь №: 849 ![]() |
Hi again Strelok, I did read it carefully. But the language used made me believe that the lower set of files should be used separately to upgrade an older independent version of the addon. Regards, Oldtimer ![]() ![]() ![]() |
![]() ![]() |
Текстовая версия | Сейчас: 26th April 2025 - 10:45 |